Spent a couple hours last night disconnecting things going through the firewall in preparation for removing the main part of the body (what Jeepers call the "tub").

• Two out of three pedals
• Under-the-dash heater  (I removed the between the seats heater when I first got the Jeep)
• A bunch of wires
• E-brake cable (kinda--it's disconnected at both ends, but I haven't gotten it through the firewall yet)
• Steering column (some real contortionist moves needed to remove some of those bolts!)

 Still a few things to disconnect, though:  fuel line, gas pedal, starter push rod, finish the E-brake cable, and probably a couple other things I've forgotten.  (Actually, I'll remove the gas tank while I'm at it--one of the tub bolts is supposed to be underneath it.  And it's a newish tank, so I'll want to reuse it anyway.)

Then it's on to removing the bolts that hold the tub down.  There are supposed to be 14 of them, but this tub is not original, so I don't know if the same number were used to install it...